No products in the cart.
Grade 2 Surface Vertical Rod Exit Device in...
$201.00
In stock
Estimated delivery on 18 - 28 February, 2023
Grade 2 Surface Vertical Rod Exit Device in Stainless Steel for 36 Doors
- Stainless Steel finish
- For doors up to 36″
- Stainless steel springs
- Non-handed / reversible
- Furnished with sheet metal and machine screws
The TH1100EDSV Series Surface Vertical Rod device is the perfect choice for double doors without mullions. They are ideal for new construction and are non-handed and reversible.
- Stainless Steel finish
- For doors up to 36″
- Material: extruded anodized aluminum push bar
- Stainless steel springs
- Latch: top pullman type, bottom bolt assembly
- Door height: 7′ standard
- Backset: 2-3/4″ on 4-1/2″ minimum stile width – if less than 4-1/2″ backset becomes half of the exposed stile width
- Strike top: suface mounted, Bottom: flat mortise
- Projection: 2-1/2″ – 1-7/8″ dogged
- Stile: 4-1/2″ minimum
- Non-handed / reversible
- Door thickness: 1-3/4″
- Door width: 48″, can be field sized to 30″
- Mounting height: recommended installation at 41″ from finished floor to center line of push rail
- Furnished with sheet metal and machine screws
- Cylinder: accepts key trim with a flat tail piece
- Dogging: 1/2 turn 5/32″ hex key
- Material: extruded anodized aluminum push bar
- Latch: top pullman type, bottom bolt assembly
- Door height: 7′ standard
- Strike top: suface mounted, Bottom: flat mortise
- Projection: 2-1/2″ – 1-7/8″ dogged
- Stile: 4-1/2″ minimum
- Door thickness: 1-3/4″
- Door width: 48″, can be field sized to 30″
- Mounting height: recommended installation at 41″ from finished floor to center line of push rail
- Cylinder: accepts key trim with a flat tail piece
- Dogging: 1/2 turn 5/32″ hex key
- Assembled Product Dimensions (L x W x H): 2.00 x 32.00 x 1.00 Inches
| Dimensions | 1 × 32 × 2 cm |
|---|---|
| Brand | Unbranded |
| UPC | 704780179283 |
| MPN | Does not apply |
| Stile | 4-1/2" minimum |
| Door thickness | 1-3/4" |
| Cylinder | accepts key trim with a flat tail piece |
| Mounting height | recommended installation at 41" from finished floor to center line of push rail |
| Door height | 7' standard |
| Material | extruded anodized aluminum push bar |
| Latch | top pullman type, bottom bolt assembly |
| Dogging | 1/2 turn 5/32" hex key |
| Projection | 2-1/2" – 1-7/8" dogged |
| Strike top | suface mounted, Bottom: flat mortise |
| Assembled Product Dimensions (L x W x H) | 2.00 x 32.00 x 1.00 Inches |
| Door width | 48", can be field sized to 30" |
